Quote:
Originally Posted by GrantedTaken
Impact wrench on those 2 bolts ?
I guess if the bolt shears, you can just resort to the BFH
|
Do not use an impact wrench, use a normal socket wrench and tighten both down equally slowly, rotor pops right off. Takes like a min or two, if the bolt sheers or worse the threads in the rotor are messed up then the it becomes more annoying to deal with. My rotors where totally sealed, I bashed at them and used pb blaster and they didnt even budge, when I finally went out and bought these bolts, it came off no sweat. Save yourself some time and effort. Any twin owner who plans on servicing their own brakes should spend the dollar or two and have these bolts lying around.