Quote:
Originally Posted by EndlessAzure
Drive to the track on the track pads all 4 corners. They're not that aggressive, you'll want to preserve brake balance, and you'll save yourself a lot of trouble. Definitely not worth it if you're not going to swap wheels at the track.
|
+1, I would recommend using the same pads (and rotors!) on both axles if possible.
According to the graphs on
this page, you should be fine driving to the track on W4s, maybe with some extra caution, especially the first dozen of braking after the putting them in.
This page specifically says "Effective for road racing, rally racing, and occasional street use".
If you haven't used these pads before, you might consider bedding them in first, although I'm not an expert on that matter.