|
Not sure about the plug on these cars, but with my Miata I am able to get the plug through the box end of a 7/8" combination wrench. 7/8" is the O2 size, using a quality combination wrench I have been able to remove them when my O2 wrench bends too much.
Make sure you get a few of the little anti-seize packets at the parts store. Apply this to the threads ONLY, before you re-install the sensor.
__________________
DJ
1999 Miata VVT swap "Maggie"
2013 BRZ "Nancy-Drew BRZ"
|