Quote:
Originally Posted by autoxtrackdrift
I have a Perrin 22mm front bar paired with the SS-1s. I re-used some Whiteline KLC 180-195 end links, which were quiet for the first 1,000 miles and two autocrosses on old street tires. The springs must have taken a set, however, because the bar started contacting the body/pinch weld in the middle of a road trip.
What's Racecomp's recommendation for adjustable end links? I figured I would ask since it takes a bit of time to get the end links set up and clearanced properly.
|
i bought Racer x front end links but not sure if i got the wrong set shipped or not, even fully extended to the point of over extended with only a few threads holding they were 3/4 of an inch shorter than stock ones. i wasn't able to fit them on the SS1 front struts due to not long enough, not sure if its because i am on jack stands or not. i do have stock sway bar. i just sent them a message, its starting to look like its gonna be up on jackstands for another week.
