Quote:
Originally Posted by Ced67
Thanks Steve,
My installator, who ordered the kit, is trying to get the informations from DT as he is used to work with them.
The passthrouh is complete so the O2 sensor is not altered.
There is just this annoying grey wire from the box that should, logically, not be connected to the passthrouhg... 
Edit : I have a 2012  |
Correct you wont want the signal wire going to passthu, jist straight to ecu evap connection. On usa cars thats likepy pinmed , but with the ecu harness it should isolate the old evap connection
You will also ned to know if the output from DT box is 0-5v or 0.5-4.5 v to setvup your ethanol scaling in tune