Quote:
Originally Posted by Ultramaroon
Bullshit lies. They have these things called cables...
|
I strongly suspect they are not referring to the linkage back to the transmission...
On every "on the floor" shifter I have worked on, there is a rather large hole in the floor for the shifter itself to go through usually about 4 inches wide and 5 or 6 inches long...
If the center spine is as they state a major structural element allowing them to have lower door sills, an opening for the shifter assembly (and technically that can be considered linkage) could affect strength.
Not a defender, and I personally love my manual shift car, but I don't think anyone outside of GM knows all the facts and design trade offs.