Just finished the install and won't be able to drive it for a day or two, but wanted to solicit some feedback from others who've done this in the meantime.
Setup:
ST XTA coilovers lowered about 1" from stock
Perrin 22mm front sway bar
Whiteline KLC180-195 end links (adjusted to about 1.25" shorter than stock, which is as long as I can make them while still being within Whiteline spec)
Pics show car on jack stands at full droop. Blue tape is for me to see if it have any contact when I am able to drive the car.
The area that gives some concern is the second pic when the suspension is at ride height. I realize it will move in an arc so that impacts clearance, but when fully compressed it looks like clearance will be tight.
Any feedback from those who've been down this road before? Thank you!
Sent from my SM-G973U using Tapatalk