Quote:
Originally Posted by Bach415
@ DeliciousTuning I am thinking of getting this kit off another member but he has EcuTek while I have OFT. Is there a way to convert this so it works with OFT? I have searched around and saw some post regarding having to use the o2 input wire connected to the evap portion off the ecu while having to find another source for the power and ground in order to get O2 sensor based flex fuel kits to work with OFT. Since this kit is bluetooth integrated, will it be the same? Will the bluetooth module work properly if converted? |
DT do make an evap connect ie oft compatable flex kit. Its lossible to convert the rear 02 conbect kits to evap conbect but you will need to do some rewiring. You would need to reroute the earth, flex signal and power wires from the rear o2 connector to your own earth point , switched 12 v and the signal wire to the evap input on ecu conbector A35 pin 20. The bluttoth should still work fine as its completly separate and links to phone or tablet but you would need the DT app for phnoe\tablet. Deliceous kit can be 0-5v or 0?5-4.5v so depending whick voltage range it uses you may need to recalibrate the oft based tune to suit