[86TOYO2k17]

Originally Posted by kev0

Thank you. I was using the Sprintex manual (http://sprintexusa.com/wp-content/up...6_Rev_1.30.pdf) during my install. On page 21 step 17, it specifically says to replace the hard line though?

You take the manual brake booster line that should have come with your kit. remove the check valve, install the hard line in place of the check valve and re install brake booster line rerouting it out of the way of the supercharger. I already showed you pictures of this line and how it’s routed. You could have one long soft line but you do not have a long enough hose. So you need to make up a suitable line reusing your hard line and the hoses supplied.