[BRZ_86_Guy]

The car as it stands is completely stock except for the exhaust system.
Currently it has a complete Tomei setup from the headers all the way back.
The reason I did the exhaust first (yes its a meme at the moment) is so you're not choking yourself while you're adding more power. Best to make sure the air can get out as the stock system is very restrictive.



It is....loud.


This is the list of completed modifications to the car:

Tomei UEL Headers
Tomei Overpipe
Tomei Frontpipe
Tomei Type60r


This is the list of modifications that I would like to add. This could change


Edelbrock Supercharger - comes with its own intake so no need for CAI.

1000cc injectors (I am well aware this is overkill but I would much rather leave room than need room)
Fuel pump
Stage 1 clutch
Forged Internals


Performance Brakes
Coil overs


Rims/Tires - Looking at a stock sizing for the front and a wider sizing for the back. Front is 17x7.5 and back I'm thinking a 17x9, MAYBE 9.5, depends on the fit without the kit.
245/40R17 Tires.


Pandem widebody kit.




Going with Delicious Tuning for the Tune on the car.






The goal for power is to pull over 400WHP out of the car. I am Canadian so I don't believe access to E85 is possible for me unfortunately so I'd have to pull this power from 94.


I am still doing a lot of research on the parts to determine who I want to be getting the parts from.


This build will take quite some time and I will be updating it semi regularly for anyone who is looking on information about the parts I'm going to be using and anyone interested in the build itself