Quote:
Originally Posted by ZC6BRZ
Good instructions, but to clarify.
There is no bottom right and bottom center. There are only 3 wires, Right, Center, Left. Green Goes to Ground (which is the center wire). The wire you want to connect Red to is the 12V Accessory (which is the black with white stripe).
The remaining wire (which people seem to mistakingly tapping power to), is also black, but that goes to the reverse switch. These mirrors are set up so that when you put the car in reverse, the auto dimming feature turns off, so that it's easy to reverse even in the dark.
|
First, I want to thank speedracer38 for the original post. Great DIY!
And thank to ZC6BRZ... just used his instructions and it took 5 min!
I used 15 inch Mirror Tap
Most probablyI will do some changes after getting the Blackvue dual channel dr900s.
Maybe a blendmount for both!
Sent from my iPhone using Tapatalk