Quote:
Originally Posted by C4RBON
Mine was not left handed. It did, however, have some loctite. I'm guessing this is why the pulley part of the tensioner is not a separate part; you can only order the entire assembly (23769AA040). This assembly may have changed over the years. Mine is from a 2015 BRZ.
And to be clear, the bolt holding the tensioner to the alternator bracket is also not left-handed; that one requires a 8mm male hex bit socket.
|
I ordered 23769AA111 for my 2013 brz.
https://www.subaruparts.com/oem-part...elt-23769aa111
I can't find any instructions on how to replace this part in the service manual.
Can't even find the torque spec on the 8mm hex bolt you mentioned.
Did you end up replacing your tensioner?