Quote:
Originally Posted by steve99
Yeah when you go fi you tend to use more of the sensor range so you often need to extend the cel trip points. Im assuming the sensor is ok and scaked correctly. You should see 1 bar or 14psi with ignition on and engine stopped, that atmospheric pressure
|
in the base map instructions i was told that i should see 0.0 boost at key on engine stopped? and to email them if it was more then .3 off. its a BAR 3 that he scaled if for cause i put it in my mod list that i sent him. when i checked it today its at 0.15 boost engine off. (this is on the openflash system)