Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

deku · 06-10-2019, 05:21 PM

Hey guys, i just wanted to make sure im doing a proper wheel set up. so my wheels will be 18x8 et48 and i will be using 5mm spacers for the front, 10mm for the rears. with using spacers im thinking of upgrading the wheel studs to the ARP 2.535 inch studs and using open ended lug nuts. would the 1.95 studs be long enough with the oem nuts? any opinions or experience doing this kind of set up?

06-10-2019, 05:21 PM	#1
deku Member Join Date: Jul 2018 Drives: 2017 subaru brz red, 93 FD RX7 Location: Chicago Posts: 54 Thanks: 5 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s)	wheel set up Hey guys, i just wanted to make sure im doing a proper wheel set up. so my wheels will be 18x8 et48 and i will be using 5mm spacers for the front, 10mm for the rears. with using spacers im thinking of upgrading the wheel studs to the ARP 2.535 inch studs and using open ended lug nuts. would the 1.95 studs be long enough with the oem nuts? any opinions or experience doing this kind of set up?