Hi ft86club forum members!
I have been a long time BMW E36 owner and have been active through out bimmerforums within the last 6-8 years.
Been driving my black 1994 325is ever since 2008 and never really looked into any other cars because of its turn key reliability with near 300k miles on the motor and chassis. In addition, the shear enjoyment of driving an analog car is something that can't be felt in most modern cars of today...
The car has gone through quite a few iterations from a stance setup to an aggressive street performance setup through out the years.
My philosophy for "building" a car is simplicity and never really over doing it.
I've always loved the OEM+ look for all cars and this is the direction that i will be going with this build as well.
I will be updating this thread frequently as time goes on and I hope some members could chime in help me out as this is a fresh chassis for me with little to no knowledge on what to expect so I would greatly appreciate some feedback!
Purchased 4/20/19
2019 BRZ Premium in CWP
I have ordered a few parts already for the car.
Fortune Auto Gen 7 500 Coilovers
Whiteline RCA + SPC Toe Arms
And a set of........
brand new set of Advan Racing TC3's in a 18x9.5 +45 for an unbelievable deal... so i had to jump on these.
With experience with the INDY500's on the previous car, i have decided that i would get the same tire but in a 255/35 square setup.
Should make for a fun project and will hopefully see some future track days as well in socal.
CHEERS!
