Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

chi86 · 06-02-2019, 11:04 PM

I was trying to install a camera using the Autoharnesshouse kit. Did not disconnect battery because I'm a dummy. Went to connect one the 10-pin harness to the back and saw a spark. Got everything put back together, OEM head unit turns on but no signal to speakers. The screen works, it can read from USB, etc., just no sound. I've tried disconnecting the battery for a while, no effect.
The clock and dome light still work, so it's not a fuse (at least not the radio fuse). What else should I check? Or is the head unit fried?

06-02-2019, 11:04 PM	#1
chi86 Member Join Date: Apr 2019 Drives: Asphalt Gray Base FR-S 6mt Location: Chicago, IL Posts: 16 Thanks: 3 Thanked 4 Times in 4 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	OEM head unit no sound HELP I was trying to install a camera using the Autoharnesshouse kit. Did not disconnect battery because I'm a dummy. Went to connect one the 10-pin harness to the back and saw a spark. Got everything put back together, OEM head unit turns on but no signal to speakers. The screen works, it can read from USB, etc., just no sound. I've tried disconnecting the battery for a while, no effect. The clock and dome light still work, so it's not a fuse (at least not the radio fuse). What else should I check? Or is the head unit fried? Last edited by chi86; 06-02-2019 at 11:17 PM.