Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - PSA: Koni adjustables with 245/40/17 clearance

Chuckable · 06-02-2019, 04:57 PM

Figured I would share my experiences with this set up in case anyone wants to run the same set up so that they will know what they are in for.

Eibach pro-kit (1”lower) with KONI “yellows”
17x8+45 wheels
245/40/17 tires with 8.2” tread width per Tire Rack (Falken Azenis)
Camber bolt in bottom position at max negative camber setting

... results in about 3mm of clearance between tire and spring perch.

This is too close for comfort for me so I’m going to install a 3mm spacer which, from what I’ve read, will still allow proper fitment on the hub as well as lug nut engagement.

Sent from my iPhone using Tapatalk

06-02-2019, 04:57 PM	#1
Chuckable Senior Member Join Date: Mar 2019 Drives: 2017 Toyota 86 Location: Georgia Posts: 329 Thanks: 14 Thanked 56 Times in 46 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	PSA: Koni adjustables with 245/40/17 clearance Figured I would share my experiences with this set up in case anyone wants to run the same set up so that they will know what they are in for. Eibach pro-kit (1”lower) with KONI “yellows” 17x8+45 wheels 245/40/17 tires with 8.2” tread width per Tire Rack (Falken Azenis) Camber bolt in bottom position at max negative camber setting ... results in about 3mm of clearance between tire and spring perch. This is too close for comfort for me so I’m going to install a 3mm spacer which, from what I’ve read, will still allow proper fitment on the hub as well as lug nut engagement. Sent from my iPhone using Tapatalk Last edited by Chuckable; 06-02-2019 at 05:40 PM.