Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Data logging misfire counts and cam positions

ChrisBRZ13 · 05-30-2019, 12:34 AM

I need to data stream or log the above stated data for an issue on my ‘13 BRZ. After reinstalling the motor it acts like it has a misfire but doesn’t throw any codes. Replaced plugs and checked the coils. Check out ok.
Mechanic says he needs to see misfire counts and cam positions to diagnose cause, does anyone know if I can do this with Romraider or OFT or is this a dealer only diagnostic tool.

Sent from my iPhone using Tapatalk

05-30-2019, 12:34 AM	#1
ChrisBRZ13 Junior Member Join Date: May 2019 Drives: BRZ Location: Frederick MD Posts: 9 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Data logging misfire counts and cam positions I need to data stream or log the above stated data for an issue on my ‘13 BRZ. After reinstalling the motor it acts like it has a misfire but doesn’t throw any codes. Replaced plugs and checked the coils. Check out ok. Mechanic says he needs to see misfire counts and cam positions to diagnose cause, does anyone know if I can do this with Romraider or OFT or is this a dealer only diagnostic tool. Sent from my iPhone using Tapatalk