Quote:
Originally Posted by Trueweltall
My 2016's dash is coming up, albeit slowly and not as bad but you can tell it has that slight M to it. Eventually I will get some epoxy and remove the vents and clamp it down while it cures. I saw a post either on here or FB and it fixed their problem. My car was also always parked with a quality sunblock in place that I shelled out $60 for.
|
Quote:
Originally Posted by Ultramaroon
Mine's not awful but I've considered gluing/stitching it together. I don't know when they updated the dies for the molds but I can see how all the early ones were reworked by hand, cutting off some material that interfered with the center vent louvers.
|
I'm thinking about glueing it but look at this crap, it's so bad I really doubt glue is going to do the trick. And the Arizona summer heat is about to be here [emoji24]
Sent from my LG-H932 using Tapatalk