Quote:
Originally Posted by C4RBON
Mine was not left handed. It did, however, have some loctite. I'm guessing this is why the pulley part of the tensioner is not a separate part; you can only order the entire assembly (23769AA040). This assembly may have changed over the years. Mine is from a 2015 BRZ.
And to be clear, the bolt holding the tensioner to the alternator bracket is also not left-handed; that one requires a 8mm male hex bit socket.
|
Thanks! I saw that my links were dead so I fixed them. Even the 2017 manual still has the note.
