Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Daver · 05-19-2019, 11:41 AM

Hi Guys,

I did a trunk swap, and I'd like to wire up the backup cam into my 15 that did not come with a cam.

I already repinned the harness that comes off the trunk to feed the License plate lights and the trunk release. This has left me 4 wires all related to the camera, and using this 2017 diagram I found I have identified them as

Yellow - CB+
Brown - CGND
Sky Blue - CV -
Orange - CV+

I have pulled the head unit, and found the harness that is meant for the Camera (has only 1 grey wire coming out of it) I would like to splice into the 4 wire mentioned above, and then pin into the head unit connector. ANyone know if I can do this? and Anyone know which ports on the connector correlate to the wires I mentioned? **Or** anyone have a pic or post that shows a 17+ head unit cam harness I can use to identify wire position?

Thanks!

05-19-2019, 11:41 AM	#1
Daver Member Join Date: Jul 2015 Drives: BRZ Location: Ohio Posts: 49 Thanks: 7 Thanked 10 Times in 8 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Wire OEM Backup Cam? Hi Guys, I did a trunk swap, and I'd like to wire up the backup cam into my 15 that did not come with a cam. I already repinned the harness that comes off the trunk to feed the License plate lights and the trunk release. This has left me 4 wires all related to the camera, and using this 2017 diagram I found I have identified them as Yellow - CB+ Brown - CGND Sky Blue - CV - Orange - CV+ I have pulled the head unit, and found the harness that is meant for the Camera (has only 1 grey wire coming out of it) I would like to splice into the 4 wire mentioned above, and then pin into the head unit connector. ANyone know if I can do this? and Anyone know which ports on the connector correlate to the wires I mentioned? Or anyone have a pic or post that shows a 17+ head unit cam harness I can use to identify wire position? Thanks!