Quote:
Originally Posted by wparsons
You can access the CANBUS through the OBD port, but you can't just listen on a single wire for a signal, you have to decode the messages passed around the system.
What are you trying to do with all this?
|
I’m trying to tap into the ignition/tachometer/NE+ wire.
I’ve found all wires but the ignition wire on the ecu 4plug module.
I’ve been installing the Bee*R unit to my gts86 smart entry car.
The whole unit kinda works with the car but doesn’t operate 100% so I’m guessing there might be stronger or more reliable wires to tap into or more desirable wires to tap into.
One guide said yellow wire from the beer to the igf
One guide said yellow wire from the beer to the tachometer
While both guides for the green wire from the beer to the NE+ Engine Speed
Right now I have it set up with the yellow wire from the beer to the tachometer because I’m not sure if there even is an igf wire on the ecu for the smart entry gts86.
Sent from my iPhone using Tapatalk