Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

MrDinkleman · 05-12-2019, 03:29 PM

PNP possible but not probable?
Back in 2011, I replaced my Yaris' single horn with a pair of IS300 hi/lo horns. I happened to find a "Y" harness adapter kit, with Toyota part numbers, on ebay from Japan. It had Toyota connectors and Toyota horns. Other than removing the bumper cover it was easy-peasy. Sounded great, too.

But I've never seen those parts or the seller since.

I was hoping to do the same with my FRS and contemplated taking the horn kit off of the Yaris, when it got totaled (which led me to buy the FRS). But then i realized the car is built by Subaru. So the connector in the car probably wouldn't be compatible with the connectors on the horns.

So, basically you'll have to buy two Toyota horn plugs and make your own "Y" harness. Then you need to buy the horns. Of course, you can just snip the connectors from a junkyard car when you get the horns but then it's not PNP anymore...

05-12-2019, 03:29 PM	#9
MrDinkleman Senior Member Join Date: Oct 2015 Drives: 2016 Oceanic, "base" model Location: Gardena, CA Posts: 398 Thanks: 129 Thanked 179 Times in 128 Posts Mentioned: 5 Post(s) Tagged: 2 Thread(s)	PNP possible but not probable? Back in 2011, I replaced my Yaris' single horn with a pair of IS300 hi/lo horns. I happened to find a "Y" harness adapter kit, with Toyota part numbers, on ebay from Japan. It had Toyota connectors and Toyota horns. Other than removing the bumper cover it was easy-peasy. Sounded great, too. But I've never seen those parts or the seller since. I was hoping to do the same with my FRS and contemplated taking the horn kit off of the Yaris, when it got totaled (which led me to buy the FRS). But then i realized the car is built by Subaru. So the connector in the car probably wouldn't be compatible with the connectors on the horns. So, basically you'll have to buy two Toyota horn plugs and make your own "Y" harness. Then you need to buy the horns. Of course, you can just snip the connectors from a junkyard car when you get the horns but then it's not PNP anymore...