Quote:
Originally Posted by snowdog
So I have a CEL and thought I'd use my ecutek cable to see if it could tell me what code it was. Plugged in and software needed to be updated, So I updated. Detected vehicle and ran the Vehicle DTC Tool.
The following is what it showed me:
"Performing DTC Operations on...
Reading DTCs...
OBD Error during reading DTCs: No Response to ODB Request
End of DTC Operation
Any thoughts?
|
Thaat look like no connection to obd port.
Check obd cavle plugeed in all the way to obd port
Check you have ignition full on not jist accessory but engine stopped.
Also see if ecutek will do logging or a query ecu.
Looks more hardware issue to me