2018 BRZ 1" lowered Eibach Pro Kit
17x9 +40 offset Konig Dekagram Advan Neova Ad08r 245/40. There is some front tire poke passed the fender. I have been driving this setup for 2 weeks no rubbbing issues.
According to alignment machine I have -2.5 driver rear -2.2 pass rear.
I had camber bolts installed, and they set the camber to -2 for both front tires. I was told this is a good track camber from some local guys. Also there was no poke anymore. When the mechanic came back there was big gouge along the whole tire and a burning rubber smell. Took almost 1/4" out of my almost brand new tire. The other tire was fine... I will have to replace one.
Long story short I am on the fence about what I should do. I only drive this car is my free time. Currently had 16k on it and is under lease, but I think I plan on buying it. I can live with the front tire poke, but is this an ideal set up for tracking. The front sticks out more then the rear. Should I buy spacers?
Basically my questions are?
What would be the ideal track 17x9 Yokahoma Ad08R square track setup?
This was the picture when they camber it to -2 before taking it for a test drive. We should of checked the clearance to the strut.
