[MachineHead]

sorry if this has been discussed before but i can’t seem to find it anywhere.

so, i somehow got a hold of a 2017+ steering wheel (the ones with steering wheel controls) and i would like to install it to my 2013 brz. can someone help me figure out how to wire it to my HU so the buttons work?

i know there are about 3 parts to this
-steering wheel to clockspring input
-possibly connecting an axxess aswc-1 to the clockspring output
-finally connecting to the HU (i know this part if i’m using an aswc-1)

1) does the new steering wheel plug in directly to my older clockspring?
2) will the clockspring have wires coming out the other side for radio/bluetooth controls considering it never had any or do i have to: a. add wires myself or b. replace with a new clockspring?
3) will i need an axxess aswc-1? and how do i wire it to the clockspring output wires.
4) how do i wire the clockspring output wires to the head unit if i don’t need an axxess aswc-1.

i know how to program the aswc-1 for my HU if it is needed.
i also know which wires my HU uses for steering wheel controls (key and key#)

i really hope someone could help me out. thanks in advance



Sent from my iPhone using Tapatalk