Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

geraldjust · 04-05-2019, 03:45 PM

@PandaSPUR

IF your car is a push start the moment the clutch swtich get to depressed position it wakes up the Certification ECU, That then sends a can signal to other modules in the car (BCM) to get ready to turn on. So a bunch of computer modules wake up. and they only go back to sleep after 20 seconds of the clutch not being depressed. (when the car is off)

So there is your problem. Maybe if your out in the "delivery" fuse thats under the hood in place could minitage a bit this issue, but i dought it.

04-05-2019, 03:45 PM	#6
geraldjust Senior Member Join Date: Jun 2018 Drives: MR2, Sliver BRZ Location: San Diego, CA Posts: 316 Thanks: 5 Thanked 261 Times in 123 Posts Mentioned: 40 Post(s) Tagged: 0 Thread(s)	@PandaSPUR IF your car is a push start the moment the clutch swtich get to depressed position it wakes up the Certification ECU, That then sends a can signal to other modules in the car (BCM) to get ready to turn on. So a bunch of computer modules wake up. and they only go back to sleep after 20 seconds of the clutch not being depressed. (when the car is off) So there is your problem. Maybe if your out in the "delivery" fuse thats under the hood in place could minitage a bit this issue, but i dought it. __________________ Always looking to tinker with something..