Works Bell hub, Rapfix GTC, EVS cruise control bracket and Nardi wheel have been installed.
Feels pretty good but I haven't been able to drive the car much. Horn doesn't work since the connectors on the flipper don't mate up with the OEM horn/cruise harness unless I completely remove the cruise control harness and add the supplied harness. Only one resistor is supplied so my airbag light is on so another resistor is on the way to remedy it.
EVS Tuning adapter brings out the stalk pretty far out and there is a chance that it will hit my leg so take that into consideration if you plan on buying something like this.
TRD bolts have been installed front and rear. They are M6x1 threads so they won't fit on the back unless you tap M6 threads or place an insert which is what I did.
Lastly the Scion key shell was swapped out for the new Toyota one.
