Quote:
Originally Posted by 504
Hi all,
I'm just compiling a series of tables for edit with my tuner through ecutek but can't seem to find any form of hotstart enrichment tables in proecu at all?
Basically car stalls after cranking on anything with 60+C IAT and have monitored a super lean start, pretty confident hotstart enrichment will cure me but tables don't appear to exist :/
Overrun enrichment doesnt exist also?
Also I'm looking at zeroing all tables in di ratio uptown and including 0.6 load, any one forecast issues with relation to this?
Thanks in advance!!
|
It is more likely to be a port injectpr scaling or lantency issue.
Elso lots of ecutek users would have problem
Note some injector scalings are for 40 psi and car euns about 60 psi fufel pressure so that needs to be taken into account
Note car stsrts on port only then runs on port only for a minute or two regardless of whats in the pi\di tables
The maf correction after start tables provide some emrichment their in neutral and in gear tables.