I started a thread in this section about my rear camber after lowering 1” on a 17 brz without PP. PP height is somewhere between standard brz and lowered 1”.
I also had a ton of rear camber, almost 3* on one side. I installed Moog rear lower control arms (SPC parts in a Moog box for $35 less). SPC camber bolts in the front to add in some camber.
I am much happier with the look and handling, the Moog arms were $180 for the pair on Amazon.
2*58’ is just shy of 3*, we use minutes instead of decimals.
Before:
After:
