[Tcoat]

Originally Posted by Gunman

I put up a total of 8 4ft led shop lights, 9 if you count the one on the workbench. It's a large 3 car garage.

I looked into epoxy, and snap together tile, and since I'm the second owner, and the floor has already had oil leak on it, I dropped the epoxy idea. Snap together tile is just too much money, and the fact you can't use jack stands on it is a no go, so I just left it alone.

You can epoxy over old oil. Etch with a light muriatic acid solution and use a quality epoxy and all will be fine. we have it on the plant floor and it stands up just fine even with 40 years worth of oil soaked into the concrete. Success is all in the prep.