Quote:
Originally Posted by 86MLR
The delay is in the engine control module.
It is for smooth operation and economy.
If you mash the pedal from idle on a cable you have 100% throttle.
Do the same with electronic and it slowly feeds in the power, it might only give you 50% throttle, even though you have rhe pedal to the floor.
This might explain it better.
https://www.carmodsaustralia.com.au/...8-10/Liberty-0 |
Thanks for the information. I was familiar with that already. I guess I was using the wrong term, but I meant the time it takes for the vehicle to respond to any throttle application, not the amount of throttle the vehicle decides to apply based on your throttle input.