Quote:
Originally Posted by lortto
Hi, im currently running rh zw6 18x8.5 et 53 and 20mm adapter front, 25mm adapter rear. Decided that during winter i want more lip on the rims and was thinking could i fit 18x10 et 14 rear, 18x9 et 22.
|
Do you have coilovers? How crazy of camber do you want to run? Without coils, you will need tophats and or two sets of camber bolts in the front. You will also need LCA for the rear, if you are going to even attempt something like this.
I have 18x9 +30 front and 18x9 +27 rear. -2.5 and -3.0 camber. I am running coils, camber bolts, LCA, and a few other parts.
Your proposed setup is not ideal at all. You will need tons of camber and stretched tires.
A 18x9 +22 will "fit" up front with a narrow tire and -3 camber. (maybe -3.5)
A 18x10 +14 will not fit. If you got it on the car, you would need LCAs, and possibly RacerX rear upper control arms. (to dial in a ton of negative camber) You will need -5 camber at least. ( I am guessing)
Additionally, You would need an 18x10 +35 to match the poke of your front. +14 is too aggressive IMO to actually work.
An 18x10 +14 will stick out 26mm more than my rear wheel. To match my wheels poke, you would need a 18x10 +40 wheel. (that's a 245/35/18 - if curious)
You can see in this pic that there is still a bit more room. Especially if you were to add more negative camber, a 18x9 +22 will "fit".
I have been to Helsinki and Rovaniemi; your country is beautiful! ( I have even been to Santa's Village to meet him)
