View Single Post
Old 01-12-2019, 01:34 PM   #41
Grady
Senior Member
 
Grady's Avatar
 
Join Date: Jun 2017
Drives: BRZ Yellow, 2019 Ranger, 2011 Evora
Location: Dallas
Posts: 1,705
Thanks: 354
Thanked 1,489 Times in 781 Posts
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Garage
Update on progress. Looks like this may not not a bad option for the MY16-17 replacement. Not complete yet but I think I have all the answers just have not tested yet.

You will need to find a donor car. MY18+ Limited. A junk yard that will give you a good deal and let you cut wires. What you will need to take off the car.

Radio (Oviously)
Aux unit assembly. Black box mounted to the radio underneath.
GPS antenna. Mounted above the radio
Dual USB plug and wire harness.
Plastic trim around the radio.
All plugs plugged into the radio. You will want to cut them with as much wire as possible. Subaru does not sell the electrical plugs or pins. Their policy is buy the harness assembly.
Possibly steering wheel controls. (This is the last problem I will work on)

Last week I went to the Dealer I bought the car from. Talked with the Technology specialist of what I was doing. He took me to the parts department and they printed out the diagrams for the MY 17 and MY18 radio and gave to me. I was able to identify the differences and come up with all the questions on differences but not the answers. Today I whent back and took them Kolaches. The 2 parts people were not there but the Parts Manager was working. Told him the story and he started getting me the answers and printing them out. Then he said hell its a PDF do you have a thumb drive? I did not but asked if he could email it to me, so he did. I do have the entire wire diagram now for the MY18. PM me if you need it.
Grady is offline   Reply With Quote
The Following 3 Users Say Thank You to Grady For This Useful Post:
G_Rossney (08-18-2019), METAL_SU-37 (03-28-2019), timurrrr (08-19-2019)