Quote:
Originally Posted by Jpembry
Thanks for all of the suggestions! as I’ve mentioned the real limiting factor is brake clearance, so I will have to go with something that has proven clearance.
|
As far as fitment I couldn’t tell you from personal experience, but a bbk that fits in pretty much any 17x8 +35 or more offset should fit on this rim. Nothing “weird” poking, sticking, bending in/out. Spokes are pretty straight and about as thin as can be made.
In fact I just measured stock rotor clearance for you. From rotor face to closest point of inside spoke is about 2.75” and from outside edge of rotor to inside rim is about 2.15” closest point of caliber to spoke is 1.5” so if you know stock caliber/rotor compared to whatever BBK your looking at should beable to tell.
As long as new caliber is less then 1.15” thicker, and new rotor is less then 4” bigger diameter. It should have plenty of clearance.