View Single Post
Old 01-03-2019, 08:10 PM   #1
Jay_lately
Junior Member
 
Join Date: Jan 2019
Drives: 16’frs zn6
Location: FL/ GA line
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Ijdmtoy 4th brake light led (bulb new version)

2016 frs
Ok gifted the 4th brake light led (ijdmtoy) for Xmas
Have some issue

Wires
Red - stop / brake pressed.
Blue - brake light on
Black - ground

My brake harness *power probe tested *

Red - parking light| * | * |black - ground
————-
Blue - brake light | * | | yellow- turn signal


My issue is I connected them like stated above
Then Turn the power switch for parking lights . The 4th brake light is not illuminated. As soon as I remove the red wire out of the pin connector. It illuminates.

*When all 3 are connected and I hit the brake the brake lights up but still is not illuminated.

*when I connect the 3 wires to a battery it works properly


Any tips ? Photos / probably have a bad bulb idk help a brother out thanks
Jay_lately is offline   Reply With Quote