Quote:
Originally Posted by soundman98
but if they're doing custom-fit fiberglass box only(no wiring), $400 for a one-off box isn't too terribly off either.
the integrity concepts boxes were about $379 for a 10" model.
|
Agree. At $400 - a box, LOC, and install is a great price.
Quote:
Originally Posted by FineVisionz
Where do I locate the wires that plug into the 12v and ground on the lc2i? Also, since the factory amp is located in the back, could I get away installing everything without taking the head unit out and just use the factory amp?
I found this on Ebay. The seller said it would work in my vehicle.
https://www.ebay.com/itm/Add-An-Amp-...d&shqty=1#shId
Any thoughts?
That does look like a nice box, but the subwoofer I have is a 12in. |
That adapter looks like it makes life easier so you don't have to splice anything. Nice plus with the remote turn on for your new amp as well.
You'll still have to run a power cable from the battery to the amp and a ground to somewhere (I used one of the mounting nuts for the rear passenger seat) but you shouldn't need to touch the factory headunit. I actually had my amp mounted under the passenger seat which made routing all of the wiring easy.
That's why I offered the sub as well
Was very happy with how tidy the enclosure kept the trunk so you don't lose a lot of space. Audio gets expensive when you do it cleanly, especially with custom enclosures like that. A generic box will be cheap, of course, but then you kinda lose usable trunk space and it's not as pretty.