Quote:
Originally Posted by xeroshoes
I'm trying to picture what you're describing.
It seems like there are only 2 options:
- Put the entire boot over the shifter first (I can't figure out how to get the shifter through the TINY hole on the top of the boot)... then connect the transmission... then wiggle the boot over the linkage, or...
- The opposite -- feed the whole boot over the transmission rod first... but I still run into the issue of working that TINY hole around the linkage.
Am I missing something? |
No, you got it. I promise that the boot does stretch and there is enough room to work it from either end. You just have to struggle with it.
You may want to get a hair dryer to heat the rubber up too. That may make it a bit more pliable and stretchy.
Sent from my iPhone using Tapatalk