Quote:
Originally Posted by n0thing
Yes, if you unbolt the cam subassembly from the head, the cams come up together as well. But you'll need to clean and reseal the cam subassembly to the head during installation. Perhaps that's a step they wanted to avoid?
|
I know what the original service manual says. I am trying to understand what the recall instructions are asking for.
Do the “new” instructions ask for A or B:
A: remove the cam caps and leave the subassembly bolted to the head.
B: unbolt the subassembly from the head
As I said before, option A would save hours of time because it avoids most of the packing seal but risks head warping. Option B is what the original manual tells you to do.