Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - How-To: Change final drive ratio (relatively) cheaply

spitsnaugle · 12-14-2018, 12:00 PM

Resurrecting this thread. Not sure if this has been discussed but it appears we can use Nitro Gears&Axel 29-spline gears with a new flange for more gear ratios.

New Flange (ours is 60x60mm)
https://www.justdifferentials.com/YO...yfitkit-29.htm This also leave the option of using a 66x66 flange for a larger joints.

Gears: 3.90 | 3.73 | 3.58

12-14-2018, 12:00 PM	#78
spitsnaugle Senior Member Join Date: Mar 2018 Drives: LS Swapped Scion FRS = 440HP Location: Dayton OH Posts: 298 Thanks: 37 Thanked 276 Times in 134 Posts Mentioned: 19 Post(s) Tagged: 0 Thread(s)	Resurrecting this thread. Not sure if this has been discussed but it appears we can use Nitro Gears&Axel 29-spline gears with a new flange for more gear ratios. New Flange (ours is 60x60mm) https://www.justdifferentials.com/YO...yfitkit-29.htm This also leave the option of using a 66x66 flange for a larger joints. Gears: 3.90 \| 3.73 \| 3.58 Last edited by spitsnaugle; 12-14-2018 at 10:57 PM.