|
Can t make screenshots in these days,
You need to create a custom map, make its X-axis and Y-axis identical to your Ignition advance map VVt on (X is engine load, Y engine rpm), and then on the first column (usually 0.15 load) fill the table from 3k rpm to redline with , for example,a value of -40
On the custom map "enable" table, put a tick on the map you want it to work on, AND on "enable map in Vsc Sport mode" only
Custom map "output definition" table: Ignition Base timing, Add map output to channel value
Last edited by tomm.brz; 11-29-2018 at 07:15 PM.
|