|
Still need help guys. I got the camera to work, but it'll only work when I first turn on the car. If I go back to the audio screen, it will not go back to the camera, even when I put it in reverse. I could have the camera power lead on the amp, or on the red pig tail coming from the 16-pin connector. Same thing either way.
I tried connecting the #2 pin reverse trigger onto the red and blue wire I saw above, and also switched it to the pink wire from RickyBobby's reply. The camera will only show on the screen if the trigger wire from pin #2 is on the red and blue wire. Nothing happens when it is connected to the pink.
I had the camera trigger wire from the RCA cable connected to both as well, and nothing changes the fact that it will only show when I first turn on the car and nothing after.
|