Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Kaotic Lazagna · 11-22-2018, 08:57 PM

Over the weekend, or when ever I have more time to continue it, maybe I'll try to partially open the 28-pin connector and try to lock in the trigger wire into pin 2 (maybe it's not even making a connection right now). I've never opened any connector before, so I'm hesitant to do that.

Also, for the actual power and ground taps for the camera, I'll be following this: http://www.ft86club.com/forums/showt...=backup+camera

So power wire to the dark green wire of the amp, and using that ground location in the trunk to ground the camera.

Last notes, I'm using Posi-Taps when tapping any wires. I have a manual transmission if that makes any difference.

11-22-2018, 08:57 PM	#2
Kaotic Lazagna Senior Member Join Date: Apr 2014 Drives: GR Corolla Location: Lathrop, CA Posts: 4,943 Thanks: 3,096 Thanked 3,028 Times in 1,865 Posts Mentioned: 40 Post(s) Tagged: 2 Thread(s)	Over the weekend, or when ever I have more time to continue it, maybe I'll try to partially open the 28-pin connector and try to lock in the trigger wire into pin 2 (maybe it's not even making a connection right now). I've never opened any connector before, so I'm hesitant to do that. Also, for the actual power and ground taps for the camera, I'll be following this: http://www.ft86club.com/forums/showt...=backup+camera So power wire to the dark green wire of the amp, and using that ground location in the trunk to ground the camera. Last notes, I'm using Posi-Taps when tapping any wires. I have a manual transmission if that makes any difference.