|
It's .. annoying clunk. These are no diesels, one has to use clutch frequently, when rowing through gears on MT. That's annoying clunk often.
BTW, i had this mod with similar round stopper. Relatively thin metal plate of pedal cut through this rubber bumper quickly. 2-3 weeks quickly. Currently i DIY made thinner but much wider (then even base, that stopper is attached to) stopper (made from round furniture anti-skid pad, that can be attached with screw). Longer contact area = will cut through less.
And main point of this mod is not so much as to rise clutch bite point, as reducing overly long dead travel till bite point, isn't it? It's simpler to do by adjusting pedal travel (and clutch sensor) imho.
|