Quote:
Originally Posted by Sportsguy83
I had the slim fans from Fullblown. Asked around, @ ILLSMOQ helped me tremendously along the way. Ended up getting these
https://www.summitracing.com/parts/spu-ix-30102029
They're the same bolt pattern as the super slim included on the FBM kit, but pull 40% more air each.
I used the stock wiring, but needed to raise the fuse amp on both to the next rating, from factory 25A to 30A this was suggested by other owners who had raised the fuse and had been running it for years (they do trip the 25A fuse, but are fine on the 30A). So far so good. The relay kit @ ILLSMOQ used has the advantage of already having the correct spal connectors, higher amp in line fuse and bigger wire. |
Did you guys need the slimmer fans or did you have extra clearance? Are the fans the same thickness all the way across or taller at the motor? Obviously the interference area is at the crank pulley so taller motors wouldn't matter