Quote:
Originally Posted by j.F.c.R.a.S
Finally after 4 years with the system, my belt has finally taken enough beating. Recently started drifting the car, so not surprised this happened. However , since I have yet to replace the belt I’m wondering if there is an easy way to swap the belt...any have a write up or instructions on how?
|
the fact that i've broken my belt over 5 times in the course of 2 years tracking with this. the short answer is no. there is no easy way. You basically have to remove the intake coupler on the super charger and possibly remove the coupler that exits the supercharger. remove intake pipe that goes into throttle body, and remove the allen head bolts that hold the entire assembly in place. once you have the allen head blts removed you can kinda just let it fall and lean up against your bumper. throw the belt on the crank last. good luck.