[FRSBRZGT86FAN]

Originally Posted by D-rek07

2013 BRZ MT

I have a catless UEL header and got the stage 2 tune from Delicious Tuning. That is the only engine related mod.

The tuner is telling me that my exhaust cams are not on target, not exactly sure what target he is referring to but says this is indicative of low oil pressure. I just changed my oil and it is full. He says to clean the OCV's. I know what this is and where to find them but how should I clean them?

You have a 2013 then you probably don't have the updated part number with a revision 2015-2017 has a newer designed one that fits right in the old cars Its right below the oil cap and oil filter with a black plug connected to it, there's four of them so I'm assuming he wants the exhaust one changed I crudely circled the right side ones:




I would find the 2017-2018 part number for those and replace them with the upgraded versions if you have the cash. Also make sure you're running clean 0W20 as that would effect the values he's getting. At a time people were getting P00B codes they released a TSB and redesigned the part on later models, I'm not sure how you would clean them, but I would make sure if your are removing them you properly replace the gaskets when you re-install. Also possibly using brake clean through them would help, but be careful of spraying the brake clean into the electrical contacts