[gtpvette]

A couple of updates. Got the E85 system plumbed,, new fuel injection hose from the hard lines up to the 'Y' block, then to E85 sensor then to the motor. I remain a little concerned with the fuel injection hose coming loose and spraying fuel all around,, but we'll see.

Got the Racer-x LCA's in, you can see the difference and there's now at least some room to bring a sway bar up to connect to the strut.

I bought a 1" dowel rod to try a few mock ups. The good news is I think the standard Speedway lengths will work. I need to determine the correct length and the shape/length of the arm though. It's still a bit fuzzy at this point and there's lots of opportunity for binding. I need to determine how much compression and droop I have. This may still not work as everything is really tight.