I have a TON of stuff available. I sold my car and picked up a '14 981CS. After 3.5yrs of 86 ownership ('15 FR-S and '17 BRZ), I had no idea I had accumulated so many things. I'm including one single photo of everything listed here with my forum moniker on it.
If you want specific photos, text Jay at 503-260-2814 and I will promptly send you high res shots. I am located in SW PDX.
I'm still working out pricing on things - as this list is exhausting to manage. Some things may or may not already have dibs on them, but aren't sold yet so they're on the list. I'll try to mark things as such to make it clear.
I'm motivated to sell, so reasonable offers will probably be accepted. Just looking for roughly market value on things, maybe a bit under to move them.
Ok, enough words, onto the list:
----------------------------------
Sickspeed minty aluminum lug nuts
Whiteline Rear Positive Traction Kit
SPC front camber kit:
- part #81305
- gave me -1.5* camber on stock suspension
17+ BRZ - Drambeenie Risers and Shine:
- Lifts the stock spoiler by 2 inches
- Paint matched to paint code K1X (crystal white pearl)
FT86 Speedfactory passenger side exhaust hole delete kit
Overland Designs Red Alcantara 6MT shift boot
Custom Black Alcantara wrapped passenger side dash piece
13 to 16 FRS "JDM LOL" LED turn signals with LED running lights
----- sold items -----
Project Mu teal lug nuts
(sold to @NoHaveMSG)
Rokblokz full height black mud flaps
(sold to @NickB34)
Gloss black Enkei PF01 wheels 17x8 +45et w/ 245/40ZR17 Continental ExtremeContact DWS06 tires
(sold to @NickB34)
- NO curbage
- Includes TPMS
- Includes Enkei center caps
- Includes hub centric rings
- I can provide an optional 3mm spacer for the front wheels to add clearance if you have negative front camber on stock struts
- 5000 miles on wheels
- 2000 miles on tires (I ran them through the winter)
17+ BRZ OEM tS fog light delete grills
(sold to @Sergeb96
- Only includes the inner portion, I used the LED bumper lights for the outer portion.
Velox / Verus aggressive rear diffuser w/ suspension covers:
(sold to John)
- Small section cut out to clear the stock exhaust.
- Has a small section where the powder coat has come off on the back side.
Velox / Verus Composite side splitters
(sold to @ShootinPutin)
Velox / Verus Composite rear spats
(sold to @ShootinPutin)
17+ BRZ OEM STI front lip:
(sold to @Skyehigh55)
- Includes original installation templates
- New well nuts
- I made the DIY for the install on ft86club:
https://www.ft86club.com/forums/showthread.php?t=113165
17+ BRZ JDM OEM LED bumper lights
(sold to @ShootinPutin)
- Looks excellent in combination with the tS fog light delete.
- Includes wiring that can be tapped into OEM boomerangs or run to a relay. Your choice.
OEM BRZ subwoofer
(sold to @HSUBLU)
OEM BRZ STI engine mounts
(sold to @Rio)
Weathertech laser cut floor mats with BRZ logos: the logos could be swapped for FRS or other model logo easily.
(sold to my BIL)
Steel Black painted lug nut set
(sold to John)
Sound tube delete kit
(sold to @Rio)
Fumoto oil drain valve
(sold to @xxatsayxx)
Grimmspeed hood strut kit
(sold to @Ultramaroon)
K&N air filter for 13-16 BRZ/FRS and 17+ 86/BRZ automatic
(sold to @LeonardoDaVinny)
Perrin oil cooler kit
(sold to @xxatsayxx)
PRL Motorsports equal length turbo kit:
(sold to @NoHaveMSG)
- Garrett GTX2867R water cooled turbo w/coolant lines
- Complete standard kit with equal length manifold, intercooler piping and couplers, intercooler with mounting bits, oil feed / return, and hoses
- Custom 3 inch v-band downpipe
- Turbosmart Race Port blow-off valve
- Turbosmart Hyper-Gate 45 wastegate with 5 and 7 lb springs, open dump tube
- VitTuned vacuum distribution block
- Vibrant windshield washer fluid reservoir
- DEI turbo blanket
- New Russell -10 AN steel weld on bung for oil return
- Includes precut radiator shrouds for intercooler piping so you don’t have to destroy yours
- Open dump tube requires cut in aluminum under tray. Very minor and doesn't disrupt aero in any tangible way.
- You’ll want to supply new gaskets for the connections to the engine block and your overripe, can advise on best options.
- I will not install for you, but will be happy to consult with shop that does the work for you to aid in install questions.