Quote:
Originally Posted by geraldjust
Yea its stored as a EEPROM. its a 93c86 i believe. But the format compared to the older clusters is not the same. its using a different storing system. Similar but not exactly the same. im using a tl866cs programmer. But almost any EEPROM reader/writer could work. Make sure you have the right data though. So double read and then write back the same data to see if it stuck. I first ran into a problem of accidently using a 8bit format rather then a 16 bit format.
IF your interested i might offer a mileage correction service if anything.
Oh again this will work plug in play with push start cars! if you got key car you will have to go to a dealer to get it programmed anyways.
|
Thank you very much for the info! I have a push button start car so the immobilizer won't be a problem. I'd like to have it display the correct mileage though. I only have an R270 programmer and I'm not sure if it can read/write to a 93c66 or c86. Unfortunately mileage correction service won't work for me since I am halfway across the globe.